Image for Illustrative Purposes Only
DDM Novastar ERO-500 Conveyor Reflow Oven
SKU: DDMERO500
ERO500
DESCRIPTION
Features
Specifications
Shipping & Delivery
DDM Novastar ERO-500 Conveyor Reflow Oven
Reflow oven with five (5) top and five (5) bottom vertical heating zones, the ERO-500 is an economic solution for low to medium volume production runs. Utilizing plenum convection heating technology, the ERO-500 provides uniform temperature profiling across the entire PCB board for enhanced SMT process control. With a maximum temperature of 320°C, the ERO-500 is compatible with most lead and lead-free solder paste profiles.
Discover the DDM Novastar ERO-500 Conveyor Reflow Oven at Mektronics Australia – your trusted source for quality tools and equipment!
- 5 vertical heating zones plus 1 cooling zone
- Status light tower included
- Clamshell hood design with mechanical struts
- Mesh belt or Edge rail conveyor units available
- Real time graphic temperature profiler to assist in profiling of board
- On-board LCD controller for easy and flexible programming control of reflow profile parameters
- Reflow oven is Lead and Lead-free compatible
| Max board width | 13" (350mm) |
| Max board height | 1.375" (35mm) |
| Heating zones | 5 top, 5 bottom |
| Max temperature | 608°F (320°C) |
| Heat tunnel length | 69" (1745mm) |
| CyclonicsTM (forced air) | Ten (10) |
| Conveyor extensions | N/A |
| Cooling station(s) | One (1) |
| Venting | Three 4" (102mm) dia. Flanges, 250 CFM (425m3/h) each |
| Cooling Zone Venting | N/A |
| Nitrogen option | N/A |
| PC Interface | Included |
| Overall dimensions (L x W x H) | 98" x 37" x 50.5" (2500mm x 945mm x 1280mm) |
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
