Image for Illustrative Purposes Only
CircuitMedic Base Board Repair Kit
SKU: CIR2013110
201-3110
DESCRIPTION
Features
Includes
Specifications
Shipping & Delivery
CircuitMedic Base Board Repair Kit
Yes, circuit boards do on occasion get damaged. They get burned, scratched, cracked, and beat up.
When your valuable circuit boards are damaged, they can be repaired, and repaired reliably.
This kit includes epoxies, color agents and many of the delicate tools needed to repair damage to the base board material, solder mask and coatings, all packaged in a rugged ESD safe carry case.
Discover the CircuitMedic Base Board Repair Kit at Mektronics Australia – your trusted source for quality tools and equipment!
-
Versatile, complete - includes everything you need for base board repair
-
Meets IPC recommended guidelines
-
HIgh strength, high temperature epoxy withstands demanding physical environments
-
Colour agents permit matching of solder mask and base board colours
5 x Alcohol swabs
4 x Circuit bond packs
5 x Cleaning brushes
1 x Colour agent, green
1 x Colour agent, light green
5 x Foam swabs
1 x Knife with #16 blade
1 x Measuring microscope pen, 25X
5 x Micro probes
5 x Mixing Picks
5 x Plastic cups
1 x Sharp dental style probe
1 x Scraper
1 x Tweezer, Crossover
1 x Tweezer, Point Tip
|
Packaging |
2 gram prepackaged containers |
|
Mix ratio |
4 parts resin to 1 part hardener |
|
Color |
Clear, transparent |
|
Pot life |
30 minutes |
|
Cure cycle |
24 hours at room temperature or 3 hours @ 165 °F (75 °C) |
|
Viscosity (after mixing) |
1900 cps @ 77 °F (25 °C) |
|
Operating temperature range |
-76 °F to 284 °F (-60 °C to 140 °C) |
|
Hardness |
88 Shore D |
|
Dielectric strength |
410 volts/mil |
|
Shelf Life |
6 months minimum |
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
