Image for Illustrative Purposes Only
Bordo BSPT Chrome Alloy Taps - Bottoming
SKU: BOR4248-1/8B
DESCRIPTION
Specifications
Shipping & Delivery
Bordo BSPT Chrome Alloy Taps - Bottoming
BRITISH STANDARD PIPE TAPER (RC SERIES PIPE TAPER)
This is based on the Whitworth thread form - a symmetrical V-thread with an angle of 55°.
BSPT has been widely adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread.
The thread diameter increases along the length of the thread allowing the coupled pipes to form a seal when torqued as the flanks of the threads compress against each other.
The taper is "1 to 16", meaning that for each 16 mm increase in the distance from the end, the diameter increases by 1 mm.
BOTTOMING TAPS have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole.
Discover the Bordo BSPT Chrome Alloy Taps - Bottoming at Mektronics Australia – your trusted source for quality tools and equipment!
| Part no. | Diameter (mm) | Pitch (mm) | Lead | Overall Length (mm) | Tapping Drill (mm) |
|---|---|---|---|---|---|
| 4220-4.00B | 4 | 0.7 | Bottoming | 54 | 3.4 |
| 4220-5.00B | 5 | 0.8 | Bottoming | 60 | 4.3 |
| 4220-6.00B | 6 | 1 | Bottoming | 64 | 5.1 |
| 4220-8.00B | 8 | 1.25 | Bottoming | 70 | 6.9 |
| 4220-10.00B | 10 | 1.5 | Bottoming | 75 | 8.5 |
| 4220-12.00B | 12 | 1.75 | Bottoming | 86 | 10.2 |
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
