Image for Illustrative Purposes Only
Bordo 4 Cutter Glass & Tile Drill
SKU: BOR2552-5.00
DESCRIPTION
Shipping & Delivery
Bordo 4 Cutter Glass & Tile Drill
TUNGSTEN CARBIDE 4 CUTTER
Precision diamond ground, double chamfered spear point tungsten carbide for fast cutting and extreme tool life (when used at slow to medium speeds). Fast starting with reduced bit wander. Suitable for use in: glazed and un-glazed ceramic tiles, glazed porcelain tiles, through-body porcelain tiles, plate (float) glass and annealed glass.
Not suitable for use with toughened or laminated safety glass.
Use a slow speed with steady but gentle pressure. Reduce the pressure at break through. For increased bit life use a cutting fluid/lubricant such as water or turpentine to reduce heat. When drilling multiple holes in ceramic tiles or when drilling vitrified porcelain use Bordo ceramic tile drills or a Bordo diamond drilling system.
DRILL BIT MATERIAL
TUNGSTEN CARBIDE(Commonly referred to as Carbide)
Is a chemical compound containing equal parts of tungsten and carbon atoms. Carbide is three times stiffer than steel and is much denser than either steel or titanium. Carbide has a very high abrasion resistance and can also withstand higher temperatures than standard HSS. Carbide tools are often used for machining hard materials such as ceramics and stainless steel, as well as in situations where other tools would wear away, such as high volume production runs. Because carbide tools maintain a sharp cutting edge better than other tools, they generally produce a better finish on parts, and their temperature resistance allows faster machining. Whilst tungsten carbide is extremely hard it is also brittle so it is important to avoid bit “chattering” as this is the most common cause of tool failure.
Discover the Bordo 4 Cutter Glass & Tile Drill at Mektronics Australia – your trusted source for quality tools and equipment!
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
