Image for Illustrative Purposes Only
BOFA AD 350 CU Cooling Filtration System
SKU: BOFL1652A
L1652AAD 350 CU
DESCRIPTION
Features
Specifications
Shipping & Delivery
BOFA AD 350 CU Cooling Filtration System
This filtered cooling air system ensures optimal laser performance and reliability.
BOFA's Advantage 350 cooling filtration system has been designed to supply cool, filtered air to both the laser and power supply module. This clean, cool air ensures optimal laser performance and reliability. It can also be used as a seal to increase the IP rating of the laser.
DeepPleat Pre Filter: The DeepPleat pre filter incorporates a sealed pleated layer of F8 media of at least 100mm in height, giving an impressive surface area for its size.
Reverse Flow Air (RFA) Technology: The RFA technology features causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter's drop out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensure longer life.
Discover the BOFA AD 350 CU Cooling Filtration System at Mektronics Australia – your trusted source for quality tools and equipment!
-
Reverse air flow technology
-
Low cost replacement filters
-
Low noise levels
-
Stainless steel unit
Optional Features (can be added at cost)
-
Remote stop/start interface (A2001)
- Filter Change Signal (A2002)
-
Dimensions (HxWxD): 595x380x380mm
-
Cabinet construction: Brushed stainless steel
-
Airflow/pressure: 350³/hr
-
Electrical data: 230v 1ph 50/60Hz Full load current: 2.0 amps
-
Noise level: < 68dBA (at typical operating speed)
- Weight: 18.5kg
DeepPleat Pre Filter Specifications
- Surface media area: 6m² approx (64.5 ft²)
-
Filter media: Glass fibre
-
Filter media construction: 100mm maxi fold construction with webbing spacers (0.32 ft)
-
Filter efficiency: 95% @ 0.9 microns
Replacement Filters
-
DeepPleat Pre filter: A1030056
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
