Bernstein TELECOM Service Case with 115-Piece Tool Set 470 x 360 x 210mm

• 2-265 2 test prods, red and black, extremely slim, pointed and flexible, blade made from 1 mm steel wire

• 2-275 Repair mirror, stainless, magnifying, concave mirror 21 mm, with BERNSTEINIT handle

• 2-601 IC-tweezers, nickel-plated, 125 mm, for gripping, inserting and removing IC´s

• 2-620 PLCC-extractor

• 2-655 Pocket inspection lamp, watertight, with pre-focused reflector

• 2-701 Insertion tool with sensor, for connecting the wires and simult aneously cutting off the residual wire

• 2-702 Insertion tool for system HVt 71, for connecting the cable conductors and jumper wires

• 2-751 Test headphones, 1 x 600 ohm, switchable from 600 to 10.000 ohm, with fine control including test prods, maximum load 2 W

• 3-112-2 Side cutters, 120 mm, for soft wire up to 1.0 mm, with rounded head, double leaf spring, chrome-plated, with transparent insulation

• 3-134 VDE Side cutters, 160 mm, for steel wire up to 1.6 mm, chrome-plated, with VDE safety insulation

• 3-235-1 Telephon pliers, 160 mm, chrome-plated, with BERNSTEINIT-insulation

• 3-532-1 Flat nose pliers, 160 mm, with long jaws, chrome-plated, with BERNSTEINIT-insulation

• 3-574-1 Water pump pliers, 175 mm, made from chrome vanadium, with BERNSTEINIT-insulation

• 3-732-1 Combination pliers, 165 mm, chrome-plated, with BERNSTEINIT- insulation

• 3-0605 Combination crimping pliers, 200 mm, for connector types 6P/6C, 6P/4C, 6P/2C, 8P/8C

• 4-141 Screwdriver, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, 75 x 3.5 mm, with black tip

• 4-142 Screwdriver, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, 100 x 4.0 mm, with black tip

• 4-143 Screwdriver, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, 125 x 5.5 mm, with black tip

• 4-222 Screwdriver, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, 260 x 3.0 mm, with black tip

• 4-227 Cross-recess screwdriver, size 1, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, blade length 300 mm, with black tip

• 4-228 Cross-recess screwdriver, size 2, as above, blade length 300 mm, with black tip

• 4-255 Cross-recess screwdriver, size 0, as above, blade length 60 mm, with black tip

• 4-256 Cross-recess screwdriver, size 1, as above, blade length 80 mm, with black tip

• 4-257 Cross-recess screwdriver, size 2, as above, blade length 100 mm, with black tip

• 4-258 Cross-recess screwdriver, size 3, as above, blade length 150 mm, with black tip

• 4-370 Watchmaker´s screwdrivers from metal, 6-piece set, in metal box, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5 mm

• 4-407 Retaining screwdriver, for inserting slotted screws, nickel-plated, blade 110 x 4.0 mm

• 4-437 Retaining screwdriver, for inserting and tightening cross-recess

  screws size 1, nickel-plated, insulated, blade length 150 mm

• 14-651 VDE Screwdriver, with VDE-insulation, blade 75 x 2.5 mm

• 14-652 VDE Screwdriver, with VDE-insulation, blade 100 x 3.5 mm

• 14-682 VDE Cross-recess screwdriver, size 1, with VDE-insulation, blade length 80 mm

• 14-683 VDE Cross-recess screwdriver, size 2, with VDE-insulation, blade length 100 mm

• 5-107 Engineer´s tweezers, made from steel, with bent tips, 150 mm, nickel-plated

• 5-117 Engineer´s tweezers, made from steel, straight-flat-wide, 145 mm, nickel-plated

• 5-122 Engineer´s tweezers, made from steel, straight, with narrow pointed tips, 155 mm, nickel-plated

• 5-240 Warding files, 6-piece set, with wooden handles, in plastic wallet

• 5-505 Insulation stripping tool, with hookblade, for cable 4 - 28 mm

• 6-103 Socket wrench, 4.5 mm, chrome vanadium, chrome-plated, with square handle

• 6-104 Socket wrench, 5.0 mm, chrome vanadium, chrome-plated, with square handle

• 6-105 Socket wrench, 5.5 mm, chrome vanadium, chrome-plated, with square handle

• 6-320 Socket wrench-set, 1/4" square drive, chrome vanadium, chrome-plated, 16-piece set in a metal case, 11 sockets from 4.0 - 13.0 mm, holder, sliding tee bar, universal joint, reversible ratchet, rigid extension

• 6-500-12 Double open-ended wrench, 12 x 13 mm, chrome vanadium, chrome-plated

• 6-500-18 Double open-ended wrench, 18 x 19 mm, chrome-vanadium,

  chrome-plated

• 6-600 Combination ring-and open-ended wrench, 7-piece set, 6.0, 7.0, 8.0, 9.0, 10.0, 11.0, 13.0 mm, chrome vanadium, chrome-plated

• 6-600-12 Combination ring-and open-ended wrench, 12 mm, chrome vanadium, chrome-plated

• 6-600-17 Combination ring-and open-ended wrench, 17 mm, chrome vanadium, chrome plated

• 6-600-19 Combination ring-and open-ended wrench, 19 mm, chrome vanadium, chrome-plated

• 6-880 Hexagon wrench keys, 8-piece set, in a wallet, 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4"

• 6-950 Ballpoint wrench keys, hexagon, 8-piece set, in a wallet, 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0 mm

• 6-995 TORX-screwdrivers with bore hole in the tip, 8-piece set, in a box, T 9, T 10, T 15, T 20, T 25, T 27, T 30, T 40

• 7-114 Engineer´s hammer, 200 g

• 7-425 Duster

• 7-429 Insulating tape

• 7-506 Roller tape, 2 m

• 7-616 Pocket saw, with adjustable wooden handle, in a wallet

• 8-110 ERSA-fine soldering iron, Tip 260 BN/230 V/16 W

• 8-385 ERSA OVAC desoldering pump

• 8-407 Solder wire spool, 250 g, 0.8 mm

• 9-316/5 5 Chip-Container, conductive box with lid, black, internal dimensions: 118 x 32 x 14 mm

SHIPPING

A delivery and handling charge applies to all orders with the exception of back-ordered items.

Unless otherwise required by Buyer, Seller will make transport arrangements as follows:

For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods

For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.

Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.

Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.

DELIVERY TIME

All quoted delivery or consignment dates are estimates only, given without engagement.

Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.

Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer

a) in the event of a delay in consignment or delivery of goods: or

b) in the event of non delivery.

Goods offered ex-stock by Seller are subject to prior sale.

In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.