Bernstein TECHNIK Service Case with Tool Set 78 Piece 6400

• hard case PROTECTION

• case rhomb design for more stability made of X-ABS material

• divisible floor tray

• document compartment in the case lid

• tool panels made of ConPearl, sturdy, washable and removable

• locks, ergonomic handle, multiple profiled aluminum frame

• hinges with case lid locking

• measures 480 x 350 x 190 mm

• weight 7100 g, empty 4400 g

• 6415 tool case PROTECTION 58 empty pockets

• 1-909 engineer mirror with extension Ø 23 mm

• 2-126 ESD desoldering lever slotted at one ends

• 2-127 ESD tin knife pointed sharp blade

• 2-128 ESD tin scraper sharp chisel form

• 2-132 spring puller 175 mm

• 2-145 screwdriver with guide sleeve

• 2-161 scriber, magnetic lifter with telescopic slide-out

• 2-265-1 test prod red blade 1 mm

• 2-265-2 test prod black blade 1 mm

• 2-601 IC-tweezers 125 mm

• 3-132-16 side cutters 130 mm

• 3-601-15 ESD side cutters CLASSICline semi flush 115 mm

• 3-606-15 ESD side cutters CLASSICline flush 120 mm

• 3-631-15 ESD round nose pliers CLASSICline not serrated jaws 120 mm

• 3-632-15 ESD flat nose pliers CLASSICline not serrated jaws 120 mm

• 3-634-15 ESD snipe nose pliers CLASSICline not serrated jaws 120 mm

• 3-732-16 combinations pliers 170 mm with serration

• 4-261 screwdriver short cross-recess PH1

• 4-301 Liliput screwdriver slot blade 2.0(+/-0.2)x0.65x40 mm

• 4-311 screwdriver slot blade 2.8x0.6x80 mm

• 4-321 screwdriver short slot blade 4.0x0.8x25 mm

• 4-343-VDE voltage tester slot blade 3.0x0.7x60 mm

• 4-351 offset screwdriver slot blade 4.5x0.65x100 mm

• 4-366-AL watchmaker screwdriver cross-recess PH00

• 4-392 watchmaker screwdriver magazine 6 pcs (1.5-2.0-2.5-3.0-PH0+handle)

• 5-006 component tweezers 145 mm jaws insulated

• 5-049 SMD tweezers 110 mm form 4 stainless steel

• 5-107 anatomical tweezers 150 mm form 22b

• 5-115 thermal tweezers 165 mm form R30 cross tweezers

• 5-117 anatomical tweezers 145 mm form 40 serrated

• 5-161 clamping scissors with teething jaws

• 5-181 wire scraper tweezers 125 mm

• 5-210 needle files set 6 pcs (flat,round,blunt,pointed,3-edge,4-edge)

• 5-301 scissors with teething

• 5-501 cable knife (open 200 mm)

• 6-750-3 double open-ended wrench 3 x 3.5 mm

• 6-750-4 double open-ended wrench 4 x 4.5 mm

• 6-750-5 double open-ended wrench 5 x 5.5 mm

• 6-750-6 double open-ended wrench 6 x 6.5 mm

• 6-750-7 double open-ended wrench 7 x 8.0 mm

• 6-750-9 double open-ended wrench 9 x 10.0 mm

• 6-820 wrench key set 8 pcs (1.5-2.0-2.5-3.0-4.0-5.0-5.5-6.0)

• 7-425 dust brush bristles width 25 mm

• 7-435 oiler with brass rotating seal 40ml

• 7-508 steel tape measure 30 cm

• 7-511 digital caliper DIN862 precision 150 mm

• 7-616 bag-saw PUK in case

• 14-651-VDE screwdriver slot blade 2.5x75 mm

• 14-653-VDE screwdriver slot blade 4.0x100 mm

• 14-654-VDE screwdriver slot blade 5.5x125 mm

• 14-681-VDE screwdriver cross-recess PH0 Ø 3.0 mm

• 15-531-VDE automatic wire stripper (0.2-6.0mm²) with stop screw

• 14-692-VDE screwdriver cross-recess PZ1 Ø 4.5 mm

• 6-320 Socket wrench set 36 pcs (Steel box with foam insert content: 1/4 inch sockets 6-kt 4.0-4.5-5.0-5.5-5.0-6.5-7.0-8.0-9.0-10-11-12- 13, 1/4 inch PH screwdriver PH1-PH2, 1/4 inch screwdriver 4.0-4.5, 1/4 inch hexagon socket 3.0-4.0-5.0-6.0, 1/4 inch TX screwdriver TX20-TX25-TX27-TX30, 1/4 inch cardan joint, 1/4 inch extension 50 and 100 mm, 1/4 inch handle with strap, 1/4 inch push-in handle with drive square, 1/4 inch lever reversible ratchet 72 teeth 140 mm, Hexagonal key 1.25-1.5-2.0-2.5-3.0)

• Brand: Bernstein

• Part Number: 6400

• Number of Pieces: 78

• Measurement: 480x350x190mm

• Weight: 7100g

SHIPPING

A delivery and handling charge applies to all orders with the exception of back-ordered items.

Unless otherwise required by Buyer, Seller will make transport arrangements as follows:

For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods

For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.

Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.

Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.

DELIVERY TIME

All quoted delivery or consignment dates are estimates only, given without engagement.

Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.

Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer

a) in the event of a delay in consignment or delivery of goods: or

b) in the event of non delivery.

Goods offered ex-stock by Seller are subject to prior sale.

In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.