Bernstein Mini Torque Screwdriver 0.05-0.6NM 100mm with Adapter

When the set torque is reached, there should be an audible click and a click should be felt. If this is not the case, please readjust the small screw on the screwdriver a little so that the screwdriver clicks audibly.
IMPORTANT NOTE: If the torque screwdriver is not used, please return it to the starting position (0 Nm). This will relieve the preload and prevent premature wear. Each torque screwdriver is unit tested and certified to DIN ISO 6789 and ASME B107.300-2010 torque standards (certificate included with product).
CARE AND MAINTENANCE The torque screwdriver is a precision instrument. To ensure tolerance, calibration must be performed regularly and is the responsibility of the owner. The recommended calibration interval is every 12 months, and may be shorter depending on the application. The product oiled by the manufacturer for lifetime use and should not be oiled additionally. Please do not throw it, or use it with a hammer, this is a precision measuring device. At best, always place back in the box after use to keep dirt and wetness away. Never disassemble the torque screwdriver yourself. If you need to repair the torque screwdriver, please contact a qualified service station. An improper repair attempt may result in damage to this instrument and it will no longer meet the accuracy requirements of DIN ISO 6789 and ASME 8107.300-2010.

• Torque shank 1/4 inch (6.35 mm)
  

• 0.05-0.6 Nm (5-60 cNm ) Tolerance (+/-6%)

• Shank length 15 mm, Ø 10 mm

• Torque easily adjustable with a knurled screw, Lock function and click sound

• supplied with a bit adapter 1/4 inch to 4 mm (5/32 inch)

• PERFECTLY SUITABLE TO USE our precision mechanics bit set article 6-340-3

• Material quality steel and aluminum

• Supplied in a sturdy plastic quadrobox

• length 100 mm

• weight 111 g

Mini torque screwdriver consisting of:

• 4-563-100 Mini Tourque Screwdriver 5-60cNm (0.05-0.6Nm) hex Drive 1/4 inch

• 4-564 bit Adapter 1/4 inch to 4mm bits, length 42,5mm

SHIPPING

A delivery and handling charge applies to all orders with the exception of back-ordered items.

Unless otherwise required by Buyer, Seller will make transport arrangements as follows:

For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods

For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.

Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.

Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.

DELIVERY TIME

All quoted delivery or consignment dates are estimates only, given without engagement.

Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.

Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer

a) in the event of a delay in consignment or delivery of goods: or

b) in the event of non delivery.

Goods offered ex-stock by Seller are subject to prior sale.

In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.