Image for Illustrative Purposes Only
Bernstein ESD Personal Grounding Handling Set 500 x 400 x 0.35mm Foldable 5 Piece
SKU: BER9-354
9-354
DESCRIPTION
Features
Contents
Shipping & Delivery
Bernstein ESD Personal Grounding Handling Set 500 x 400 x 0.35mm Foldable 5 Piece
Antistatic mat with a surface resistance of less than 10^8 Ohm (DIN 54345-1, DIN 53482), extremely tear-resistant, cold resistance -10 °C (DIN EN 1876-1), heat resistance +70 °C, flame-retardant (according to LOBA regulation, NFP 92507: M2), abrasion-resistant, antimicrobial.
EPA suitable. For working in electrostatically protected areas (ESD workplace / ESD protection zone).
Wrist grounding, as a safe method to derive electrostatic charge from people, consists of an adjustable wrist strap with woven silver-plated plastic fibers (close skin contact necessary) and a spiral cable, which connects the wristband with the earthing point via press buttons, electrically dissipative. The coiled cable has a safety resistance of 1 MOhm on each connection side and is approved for workplaces with a rated voltage up to 250 VAC. To ensure adequate insulation, the bracelet may only be stored in a dry place. Washing instructions for the bracelet: machine wash up to 30 ° C with soft washing powder, drying at low temperature (warm not hot), do not bleach. Avoid contact with acidic / alkaline solvents. ESD protection is retained for about 30 washing process.
Discover the Bernstein ESD Personal Grounding Handling Set 500 x 400 x 0.35mm Foldable 5 Piece at Mektronics Australia – your trusted source for quality tools and equipment!
-
Content: see parts list
-
foldable workplace pad 500 x 400 x 0.5 mm
-
black, dissipative 10^8 ohm (surface resistance to DIN IEC 61340-4-1)
-
mat with 2x 10 mm press buttons
-
adjustable elastic wristband with woven in silver-plated synthetic fibres, allergy-free.
-
Meets the safety requirements for wrist grounding according to BGFE.
-
spiral cable 2.4 m highly elastic
-
earthing cable 1.5 m with 2 press buttons
-
for connection to a grounding plug
-
weight 160 g
ESD handling set consists of:
-
9-354-100 ESD table mat 500x400x0.5 mm
-
9-342-1 ESD contact bracelet blue
-
9-342-2 ESD spiral cord for bracelet 70 - 200 cm black
-
9-343-1 ESD grounding cable 1 MOhms, 1800 mm 2 press-studs 10/10 mm
-
9-353 ESD crocodile clip
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
