Image for Illustrative Purposes Only
BenchVent Overspray Filtration Cabinet BV600
SKU: BV600
BV600
DESCRIPTION
Features
Resources
Specifications
Shipping & Delivery
BenchVent Overspray Filtration Cabinet BV600
The BenchVent BV600 is a tanning mist filtration cabinet that vastly reduces over-spray and particle deposits when spraying sunless tanning solutions. Suitable for all types of solution.
It's ideal for use in larger salons or for mobile beauty therapists.
The BenchVent BV600 vastly reduces overspray and particle deposits for a cleaner, healthier working environment for the salon user and mobile therapist. These tanning units are floor standing and the BV600 can be used in a small room without being inside a spray tan cubicle.
All BenchVent filtration and extraction systems carry a lifetime guarantee, are quiet in operation and can be assembled in seconds. Simply plug in and switch on.
The particulate (intake) filter is a three stage graduated fibre filter with a high 'dust' holding capacity for long life. Filtration to 5 micron particles. NB: Spray particulate sizes vary from 10 to 20 microns. The final filtration stage absorbs any residual moisture. Through the process of filtration, absorption and dilution, operator and client exposure to airborne tanning overspray is significantly reduced and surrounding area cleanliness is enhanced. These units are designed as mobile 'spray traps' to assist with cleanliness and for immediate operator and client protection from concentrations of airborne tanning solution mist.
They are not recommended for continual Usages in confined and/or badly ventilated areas.
Demonstrating adequate control of the risks to the health of employees students and the general public, from dusts, powders, mists, fumes and vapours is the fundamental requirement of the Control of Substances Hazardous to Health (CoSHH) Regulations 2002 and 2004.
Discover the BenchVent Overspray Filtration Cabinet BV600 at Mektronics Australia – your trusted source for quality tools and equipment!
-
Vastly reduces mist & particle deposits
-
Economy coupled with efficiency
-
Ideal where space is of paramount importance
-
Ultra Portable
-
Powerful, quiet fans
-
Lifetime warranty
-
High volume filters capable of up to 60 tans!
View the datasheet HERE
|
Weight |
21 kg |
|---|---|
|
Dimensions |
86 × 56 × 36 cm |
|
Dimensions |
600x445x200 (wxhxd) |
|
Description |
Steel construction, finished in black powder coating €“ back stand €“ carry Handle €“ particulate and moisture filters €“ 2 x rotor motor axial fans, brushless, UL, VDE and CSA approved €“ sealed electrical wiring and switch, downstream of filters |
|
Air Volume at Free Air |
650m3/hr |
|
Ave. Air Velocity at Filter Face |
0.60 m/sec |
|
Fan Motor Spec |
230V 50Hz 80W, 115V 60Hz 76W |
|
Filters |
Particulate Filter: IFA5, Post Filter PRE535 |
|
Noise Level LAeq dB(A) |
50 db(A) |
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
