Image for Illustrative Purposes Only
BenchVent Ducted Fume Extraction Cabinet (Hood ID 670 x 525 x 450) BV660H-D
SKU: BV660H-D
BV660H-D
Description
Includes
Usages
Features
Specifications
Shipping & Delivery
The BenchVent BV660H-D Extraction Cabinet is our flagship hood mounted extract-to-atmosphere cabinet. It’s been designed to capture, contain, filter and expel harmful contaminants within electronic design & rework, dental/medical labs, pharmaceutical labs and classroom environments.
** ADDITIONAL CHARGES MAY APPLY FOR AIR FREIGHT & BULKY ITEMS **
Discover the BenchVent Ducted Fume Extraction Cabinet (Hood ID 670 x 525 x 450) BV660H-D at Mektronics Australia – your trusted source for quality tools and equipment!
-
Filter unit with centrifugal fan
-
Hood Enclosure
-
Hood Light
-
Polycarbonate hinged front panel
-
Particulate filter
-
2mtrs x 100mm dia flexi-duct
-
Power Lead
-
Data/Warranty Booklet
The BV660H-D is ideal for use with spray adhesives, conformal coatings and paints, monomers, hazardous powders and particulates, resins, sealants, solders, light grinding particles, organic solvents and cleaners etc.
All handling and/or use of potentially harmful substances is carried out within the hood enclosure in front of the intake filter area. For artwork applications, standard A2 drawing board can be placed within the hood enclosure. The board fits at an angle for efficient overspray capture.
These fume cabinets are designed for immediate operator protection whereby ‘large’ particulates (> 5 microns) are filtered out and ‘fine’ particulates (<5 microns) together with odours, gases, vapours and fumes within the hood enclosure are exhausted to atmosphere via the flexi-duct(s).
The Flexi-duct can be fixed to a standard domestic vent or simply placed through a partially open window to facilitate portability and/or convenience.
-
2mtrs flex-duct
-
Clear polycarbonate panel for protection
-
Hood lighting
|
Weight |
56 kg |
|---|---|
|
Dimensions |
670x525x450 (wxhxd) [internal] 680x600x450 (wxhxd) [overall] |
|
Description |
Steel construction finished in grey – fan/filter unit mounted onto hood enclosure complete with clear polycarbonate panel and hood lighting – particulate filter – centrifugal blower, external rotor motor type, brushless, UL, VDE and CSA approved – sealed electrical wiring and switch, downstream of filter. Flexi-duct 2 metres x 100mm dia. |
|
Air Volume at Free Air |
355 m3/hr |
|
Ave. Air Velocity at Filter Face |
0.60 m/sec |
|
Ave. Air Velocity at Hood Face |
0.55 m/sec |
|
Fan Motor Spec |
240V 50Hz 40W, 115V 60Hz 45W |
|
Filters |
Standard Particle Filter – IFA3P |
|
Noise Level LAeq dB(A) |
58 db(A) |
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
