Image for Illustrative Purposes Only
Amprobe MLS55-3 Pipe transmitter for AT-3500
SKU: FLUMLS55-3
MLS55-3
About
Shipping & Delivery
Amprobe MLS55-3 Pipe transmitter for AT-3500
Amprobe MLS55-3 Pipe transmitter for AT-3500 Overview
Amprobe MLS55-3 Pipe transmitter for AT-3500 induces a frequency into a buried pipe for tracing the pipe with the R-3500 receiver in the Amprobe AT-3500 underground cable and pipe locating system (not included). The MLS55-3 sonde pipe locator can locate non-metallic pipes and, when used with a transmitter and receiver, it helps provide a more accurate depth measurement than when locating with just a receiver and transmitter. The M-5000 operates at a 33 kilohertz (kHz) frequency. It measures 4.8 x 0.74 x 0.74 inches (H x W x D). (H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; and D is depth, the horizontal distance from front to back).
Amprobe MLS55-3 Pipe transmitter for AT-3500 Pipe and cable locators, also called utility locators, find pipes, cables, and wires that are buried in the ground for determining where to excavate on a site and for locating buried fixtures in need of maintenance or replacement. Pipe and cable locators are used in electrical, plumbing, telecommunications, utility maintenance, construction, and home repair applications. They have a transmitter and a receiver and use active or passive methods of location. In active location, the transmitter induces a signal at a specific frequency either into the ground, where it's picked up by buried utilities, or directly into a pipe, cable, or wire that is connected to the transmitter. As the signal is being transmitted into the buried utility, the receiver is passed over an area until it detects the signal and locates the buried pipe, cable, or wire. In passive location, the receiver searches for alternating current (AC) frequencies or radio waves emitted by energized cables, wires, and pipes without the need for a transmitter. Pipe transmitters, signal clamps, and grounding stakes can be used to help improve locator accuracy.
Amprobe manufactures electrical testing equipment for commercial, industrial, and home use. The company was founded in 1948 and is headquartered in Everett, WA
Amprobe MLS55-3 Pipe transmitter for AT-3500 includes
| Model Name | Description |
| MLS55-3 | Amprobe MLS55-3 Pipe transmitter for AT-3500 |
Discover the Amprobe MLS55-3 Pipe transmitter for AT-3500 at Mektronics Australia – your trusted source for quality tools and equipment!
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
