New
New
Image for Illustrative Purposes Only
Tempo Optical Time-Domain Reflectometer (OTDR) (1310/1550Nm) With OPM SLS VFL
SKU: TEMOFL100-NA
OFL100-NA
DESCRIPTION
Features
Resources
Specifications
Shipping & Delivery
Tempo Optical Time-Domain Reflectometer (OTDR) (1310/1550Nm) With OPM SLS VFL
The OFL100 OTDR enables the front-line technician to quickly locate loss events in the last mile of the FTTx network.
The touchscreen provides an intuitive interface for even newly provisioned technicians so that they can locate loss events such as cut fibers, contaminated or damaged connectors and excessively bent fibers. The Auto Mode allows for the technician to initiate a measurement without adjusting any test parameters. The Expert OTDR Mode provides access to all the features that the savvy OTDR technician demands so that they can refine measurement parameters to be able to troubleshoot the most demanding faults.
Results can be displayed using a traditional OTDR trace or linear map with user-selectable Pass/Fail analysis. All events are measured, annotated, saved and exported as an industry-standard SOR file that is compliant to GR196 Telcordia standards. The SOR file can be imported into the Trace Viewing program where analysis can be performed and test results can be saved as a PDF report.
The integrated VFL provides a safe level of red laser light to visually locate fiber faults within the OFL100 deadzone. The VFL can be used to confirm continuity of improperly labeled or not labeled fiber optic cables up to approximately 5km. The VFL output is set to ≤1mW which is a Class 2 device that is deemed to be safe by the FDA.
The OPM can be used to measure absolute optical power levels as well as allow the technician to perform loss measurements on a fiber link of the device when used in tandem with the integrated stabilized laser source. Full fiber tracing is supported with tone injection and sensing.
Discover the Tempo Optical Time-Domain Reflectometer (OTDR) (1310/1550Nm) With OPM SLS VFL at Mektronics Australia – your trusted source for quality tools and equipment!
-
Test and troubleshoot faults in last mile fiber optic links
-
Validate installed last mile fiberoptic links for compliance to design
-
Small ruggedized package weighing less than 1.1 pounds
-
Short learning curve allows the technician to be productive quickly
-
Easy to use “single button” interface with “Auto Test” mode
-
Optical power meter, stabilized laser source, and visual fault locator included standard with all models
-
Free Trace Viewer documentation program
-
Link Viewer that provides a linear Pass/Fail analysis
-
On-board storage of 8GB
| Attribute Name | Attribute Value |
|---|---|
| OTDR | |
| Wavelength | 1310/1550nm |
| Dynamic Range | 26/24dB |
| Event Deadzone | 2.5m |
| Attenuation Deadzone | 8m |
| Measurement Ranges | 500m, 1km, 2km, 4km, 8km, 16km, 32km, 64km and 100km |
| Pulse Widths | 3ns, 5ns, 10ns, 20ns, 30ns, 50ns, 80ns, 160ns, 320ns, 500ns, 800ns,1μs, 2μs, 3μs, 5μs, 8μs, 10μs and 20μs |
| Measurement Accuracy | ±(1m + Sample Interval + 0.005% x Test Distance |
| Linearity | ≤0.05dB/dB |
| Loss Resolution | 0.001dB |
| Loss Threshold | 0.20dB |
| Distance Resolution | 0.001m |
| Refractive Index | 1.00000 to 2.00000 |
| Reflection Accuracy | ±3dB |
| File Format | SOR compliant to Telcordia GR196 |
| Loss Analysis | Four Point & Five Point |
| Laser Safety | Class 1M |
| Bulkhead | SC/APC (Optional FC Available) |
| Trace Update Rate | 3Hz |
| OPTICAL POWER METER | |
| Wavelength Range | 800nm to 1700nm |
| Calibrated Wavelengths | 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm and 1650nm |
| Measurement Range | +26dBm to -50dBm |
| Measurement Resolution | 0.01dB |
| Measurement Accuracy | ±5% |
| Tone Frequencies/Sensing | CW, 270Hz, 330Hz, 1kHz and 2kHz |
| Bulkhead | 2.5mm Universal |
| VISUAL FAULT LOCATOR | |
| Wavelength | 650nm ±20nm |
| Output Power | <1mW |
| Mode of Operation | CW, 1Hz and 2Hz |
| Bulkhead | 2.5mm Universal |
| Laser Safety | Class 2 |
| STABILIZED LIGHT SOURCE | |
| Wavelength | 1310/1550nm |
| Output Power | ≥-5dBm |
| Power Stability | CW, ±0.5dB/15 minutes after continuous on of 15 minutes |
| Bulkhead | SC/APC (Optional FC Available) |
| Tone Frequencies | CW, 270Hz, 330Hz, 1kHz and 2kHz |
| OPTICAL LOSS TESTING | |
| Wavelength | 1310nm and 1550nm |
| Insertion Loss Testing | Integrated OPM and SLS |
| RJ45 SEQUENCE TESTING | |
| Cable Type | Straight and Interleaved (T568) |
| MECHANICAL | |
| Display | 4.3” 800x400 TFT LCD Touchscreen |
| Power Supply | AC to DC 100-240VAC, 50/60Hz |
| Power Supply Format | North America, United Kingdom and European |
| Battery Lifetime | >12 Hours Continuous Test |
| Weight | <1.1lbs (<0.5kg) Including Battery |
| Size | 6.8”x 4.3”x 1.8” (173mm x 109mm x 45mm) |
| DATA | |
| Internal Storage | 8GB (>200,000 Curves) |
| Interface | USB Type C, 8GB SD Card |
| ENVIRONMENTAL | |
| Operational Temperature | -10°C to +50°C |
| Storage Temperature | -40°C to +70°C |
| Relative Humidity | 0 to 95% Non-Condensing |
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
