Image for Illustrative Purposes Only
Tempo Active Cladding Fusion Splicer Kit With Cleaver Included
SKU: TEM915FS-KIT1
915FS-KIT1
DESCRIPTION
Features
Specifications
Resources
Shipping & Delivery
Tempo Active Cladding Fusion Splicer Kit With Cleaver Included
Includes optical fusion splicer and cleaver
Optical Fusion Splicer
The 915FS touchscreen optical fusion splicer uses active cladding alignment technology which allows the technician to reliably fuse fiber optic cables with low splice losses. Active clad technology splicers provide a more cost effective splicing alternative to core alignment but still provides low splice losses which is ideally suited for FTTH installations. The intuitive user interface keeps the learning curve short and enables the technician to be productive in a very short time. FTTx, P2P installations, and all standard fibers are supported with pre-qualified splicing profiles that can be modified and subsequently stored for more demanding fiber applications.
The 915FS uses the Tempo Splice on Connector, which provides a low loss, low return loss, and reliable connection that surpasses the failure prone mechanical connector. Splice on connectors also allow for easier fiber routing, which reduces fiber preparation since the splice on connector is pre-cleaved and also eliminates the need for a splice tray.
Optical Fiber Cleaver
The 915CL cleaver provides fast and accurate cleaves that can be used with any fusion splicer. It can also cut and prepare fibers for use with mechanical connectors.
When the fixed clamp is installed the fiber is securely held in place and is capable of cleaving 200 micron, 250 micron, 900 micron, 3mm, ribbon, and bowtie fibers. The dust bin collects all fiber end cuts for safe disposal.
Discover the Tempo Active Cladding Fusion Splicer Kit With Cleaver Included at Mektronics Australia – your trusted source for quality tools and equipment!
Optical Fusion Splicer
-
Active clad four motor technology
-
Seven-second splicing
-
Five-second boot time
-
200 complete cycles per battery charge
-
Compact and lightweight for the most demanding jobs
-
Compatible with loose tube fibers
-
Screenshot capable
-
Drop tested to 76cm
-
Eighteen-second shrink time
-
5,000 burns electrode life
-
Attenuation mode capable
-
Password protection for anti-theft
-
Compatible with splice on connectors, SC, LC, FC, and ST
-
IP52 compliant
-
On-board instruction manual
-
5.0” Color LCD touchscreen
-
3-year warranty
Optical Fiber Cleaver
-
Cleave singlemode and multimode fibers
-
Precision-engineered blades accurately cut fibers for minimal loss
-
Fully automatic with auto blade return
-
Over 48,000 cleaves blade lifetime
-
Dust bin safely collects fiber end cuts
-
Fixed clamp for maximum versatility and standalone operation
-
Cleaves single fiber, ribbon cables & loose tube fibers
Optical Fusion Splicer
| Attribute Name | Attribute Value |
|---|---|
| Applicable Fibers | SM (G.652); MM (G.651); DS (G.653); NZDS (G.655); BIF (G.657); EDF |
| Fiber Cleaved Length | 10mm |
| Cladding Diameter | 100 to 1000µm |
| Fiber Count | Single |
| Fiber Aligning Method | Active Clad |
| Splice Loss | (Typical) 0.02 dB (SM); 0.01 dB (MM); 0.04 dB (DS); 0.04 dB (NZDS & BIF) |
| Splicing Mode | 60 Preset / User Definable Modes |
| Splice Time | 7 seconds |
| Boot Time | 5 seconds |
| Number of Splices Per Battery Charge | 200 (including 60mm heat shrink cycle) |
| Splice Connector | SC, LC, FC, ST |
| Arc Calibration Mode | Automatic & Manual |
| Protection Sleeve Length | 60mm, 40mm, Micro Sleeves |
| Ingress Protection | IP5X (Dust); IPX2 (Water) |
| Storage of Splice Results | 5,000 Results, 100 screenshots |
| Drop Test | 76cm on five axis |
| Tension Test | 2N |
| Fiber Display Magnification | 200x |
| Tube Heating Time | 18 seconds |
| Attenuator Mode | 0.1 to 15 dB |
| Electrode Life | 5,000 Splices |
| Display | 5" Color LCD Touchscreen |
| Connectivity | USB |
| Storage Temperature | -40 to +158F (-40 to +70C) |
| Operating Conditions | Pressure: 0 to 16,404 feet (0 to 5,000 meters) above Sea Level Humidity: 0 to 95% Temperature: -4 to +131F (-20 to +55C) |
| Power Supply | 100 to 240V AC Adapter; Li-ion Battery (4400 mAh) |
| Weight | 3.3lbs (1.5kg) |
| Dimensions | 4.9" x 4.9" x 5.3" (125 x 125 x 135mm) |
| Password Protection | Yes |
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
