Image for Illustrative Purposes Only
Prostat PRV-815 Premium Electrode Qualification Kit
SKU: PROPRV-815
PRV-815
DESCRIPTION
Features
Includes
Shipping & Delivery
Prostat PRV-815 Premium Electrode Qualification Kit
This kit includes the PRV-813 Conductive Rubber Electrode Verifier which is precision fabricated to electrically measure the surface flatness of the electrode’s conductive rubber surface to within approximately 0.003 inch. Considering surface irregularities, flatness insures the electrode’s ability to make full contact with a surface under test.
The fixture includes 20 contact pads, each connected to a 10 megohm [1.0x107 (±1%) ohm] resistor, all connected in parallel to each other. If an electrode surface is uniformly flat and makes contact with all 20 pads, the electrode resistance will be between 4.95x105 to 5.05x105 ohms. The approximate range of the PRV-813, 5.00x105 ohms ±1%.
Discover the Prostat PRV-815 Premium Electrode Qualification Kit at Mektronics Australia – your trusted source for quality tools and equipment!
-
Use to Qualifying or Cerftifying Material & Installation
-
Verification fixture to measure resistance and flatness of pads included
-
Each electrode has a resistance of less than 10 ohms
-
Flatness is measured and within Prostat’s Specs
-
Premium Electrodes Capped to protect the pad against deformation
-
Light Dressing Pad is included to clean and dress the electrode pad if needed
-
Ceritificate of Calibration Traceable to NIST provided
-
PRV-813 Conductive Rubber Electrode Verifier
-
PRS-801-WV Premium Conductive Rubber Electrodes (2 each)
-
PRS-801-WDP Electrode Light Dressing Pad
-
PRV-815C Carrying Case
-
User Manual
-
Certificates of Calibration with data, treceable to NIST
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
