Milwaukee M12 FUEL™ 16 Gauge Nibbler Kit

MILWAUKEE 12V FUEL™ 16 Gauge Nibbler Skin M12FNB160

The M12 FUEL™ 16 Gauge Nibbler is a compact light weight tool that provides the same cutting capacity as its 18V competitors on a 12V system. Delivering fast clean cuts in 16 gauge mild steel, the nibbler is rated for 18 gauge stainless steel and 12 gauge aluminum. Our M12 FUEL™ 16 Gauge Nibbler has the power to perform in heavy applications such as cutting up to 22 gauge spiral duct seams. The nibbler tool provides a variable speed dial, tool free die holder orientation change, and LED work light offers maximum control and productivity. The unique chip collection bag, kitted with the tool, reduces jobsite cleanup. The compact and light weight form factor enables greater access and mobility on the jobsite.

• Ability to perform clean cuts through aluminium, mild steel and stainless steel

• Max cut diameter of 81mm

• Variable speed trigger for precise, clean cuts

• Able to complete tough applications with ease

• 1,400 - 2,200 strokes per minute

• Ability to cut up to 35.5mm/second

• Only 1.6kg in weight when paired with a M12™ REDLITHIUM™ 4.0Ah Battery for minimum fatigue

• Low profile design allows for easy access in tight spaces

Specifications

• SPM: 1,400 - 2,200

• Cut Speed (mm/sec): 35.5 max

• Max Cut Capacity (Aluminium): 12 Gauge (2.1mm)

• Max Cut Capacity (Mild Steel): 16 Gauge (1.6mm)

• Max Cut Capacity (Stainless Steel): 18 Gauge (1.2mm)

• Variable Speed Dial: Yes

• Switch Type: Lock-On

• Cut Diameter: 81mm (32")

• Tool-Free Punch & Die Change: Yes

• Tool-Free 360° Punch & Die Holder Rotation: Yes

MILWAUKEE 12V Redlithium-Ion 2.5Ah Compact Battery M12HB2

The 12V REDLITHIUM™ HIGH OUTPUT™ 2.5Ah Compact Battery delivers 25% more power and runs 25% cooler than the 12V REDLITHIUM™ 2.0Ah Compact Battery. This increased performance of the lithium-ion battery gives you the same power and runtime of an 12V REDLITHIUM™ battery in a lighter and more compact package.

The 12-volt battery pack delivers fade-free power and runs substantially cooler through demanding applications, allowing you to push your cordless power tools throughout a wide range of applications. Its compact, lightweight design allows you to work in tight workspaces and reduces fatigue. Each battery pack is durably built for heavy-duty use, runs cooler, and performs in climates below -18°C.

In addition, the 12V REDLITHIUM™ HIGH OUTPUT™ 2.5Ah is built with a resistant housing, providing increased protection against exposure to common oils, greases, and solvents found in automotive and manufacturing environments. The 12V REDLITHIUM™ HIGH OUTPUT™ 2.5Ah battery is fully compatible with 125+ M12™ solutions.

• 12V REDLITHIUM™ HIGH OUTPUT™ 2.5Ah Compact Battery runs up to 25% cooler vs M12B2

• Increased thermal protection is optimised for high draw tools ensuring batteries don’t overheat even in the toughest applications

• REDLINK™ intelligence provides optimised performance and overload protection

• 12V REDLITHIUM™ HIGH OUTPUT™ 2.5Ah Compact Battery delivers 25% more power vs M12B2

Specifications

• Platform: M12™

• Amp Hour: 2.5

• Voltage: 12V

• Cell Type: HIGH OUTPUT™

MILWAUKEE 12V Battery Charger C12C

Quickly charges all M12™ batteries. Power up your M12™ REDLITHIUM-ION in less than an hour with the M12™ Lithium-Ion Charger. It communicates directly with the battery pack to manage charges and features an easy-to-load design. The charger’s slim profile requires little bench-top room, while the pass-through plug conserves valuable outlet space. Monitor battery charges for all of your M12™ cordless tools with the onboard indicator light.

• Single unit simplicity: Charges all M12™ Batteries

• Charge management: Charger communicates with the battery pack to ensure a full charge and battery protection

• Onboard indicator light: Provides the status of the battery

SHIPPING

A delivery and handling charge applies to all orders with the exception of back-ordered items.

Unless otherwise required by Buyer, Seller will make transport arrangements as follows:

For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods

For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.

Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.

Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.

DELIVERY TIME

All quoted delivery or consignment dates are estimates only, given without engagement.

Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.

Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer

a) in the event of a delay in consignment or delivery of goods: or

b) in the event of non delivery.

Goods offered ex-stock by Seller are subject to prior sale.

In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.