Image for Illustrative Purposes Only
MG Chemicals Sn100e, 0.51mm Dia, 99.5% Tin, 0.5% Copper, trace of Cobalt, Lead Free, RA Flux, 454g
SKU: MG4942-454G
4942-454G
About
Features
Shipping & Delivery
MG Chemicals Sn100e, 0.51mm Dia, 99.5% Tin, 0.5% Copper, trace of Cobalt, Lead Free, RA Flux, 454g
MG Chemicals Sn100e, 99.5% Tin, 0.5% Copper, trace of Cobalt, Lead Free, RA Flux, .51mm, .02” Dia, 454g Overview
The 4942–4944 Sn100e RA Solder Wire is an electronic grade solder wire. It uses a high-purity, eutectic tin/copper/cobalt alloy that exceeds J-STD-006C and meets ASTM B 32 purity specifications. It is complemented with a rosin activated, medium activity flux that is classified as ROM1 according to J-STD-004B.
This solder is a great lead-free alternative to leaded solders. It generally provides better wetting, contact angle, flow, and visual appearance than typical Sn63/Pb37 no clean solders, while still delivering excellent performance characteristics. It offers superior solder penetration into plated through holes and surface mount interconnects. Further, it is a suitable replacement for SAC305 solder since the 494x forms brighter, shinier, and less grainy joints. Furthermore, it is less expensive than SAC305.
The 4942–4944 solders achieve a consistent solder and flux percentage through a state-of-the-art, extrusion, wire-drawing machine. This machine continually monitors the wire to prevent voids and ensure consistency, providing a top-grade solder wire.
Discover the MG Chemicals Sn100e, 0.51mm Dia, 99.5% Tin, 0.5% Copper, trace of Cobalt, Lead Free, RA Flux, 454g at Mektronics Australia – your trusted source for quality tools and equipment!
- Lead free eutectic alloy (liquidus = solidus temperature)
- Alloy exceeds J-STD-006C and meets ASTM B 32 purity requirements
- Flux meets J-STD-004B
- Fast wetting
- Fast flowing
- Non-corrosive resudues
- Non-conductive residues
- Compliance:
- Dobb-Frank (DRC conflict free)
- REACH (compliant)
- RoHS (compliant)
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
