Image for Illustrative Purposes Only
MG Chemicals 8327GL5 Non-Silicone Liquid Thermal Gel, 5 W/(m·K) 180ml 294g Jar
SKU: MG8327GL5-180ML
8327GL5-180ML
DESCRIPTION
Features & Benefits
Specifications
Resources
Shipping & Delivery
MG Chemicals 8327GL5 Non-Silicone Liquid Thermal Gel, 5 W/(m·K) 180ml 294g Jar
8327GL5 is a 1-part, silicone-free, high temperature, soft gel with very high thermal conductivity and flame retardancy. This form-in-place, non-curable gel is easy to dispense and conforms to the intricate geometries at the component/heatsink interface, ensuring all air is displaced and eliminating potential hotspots. It has a very low modulus and robust temperature range, making it a practical solution where high heat dissipation, low component stress and thermal cycling stability are needed. Since the gel does not cure, circuits can be powered up immediately following application, offering exceptional convenience.
This thermal gel is most often used as a gap filler on heatsinks to CPUs, LEDs, and other electronic components. Its high thermal conductivity makes it ideal for energy-intensive devices like telecommunications equipment, PCs for gamers and electric vehicle battery packs.
This product’s consistency is flowable enough to dispense from a syringe yet will not run making it a truly form-in-place material. The low modulus gel can easily be compressed to achieve thin bond lines, minimizing thermal resistance.
For applications demanding less thermal conductivity, use 8327GL3 whereas 8327GL6 is suited for applications requiring maximum heat dissipation. We also have a full line of thermally conductive adhesives which provide a permanent bond and offer exceptional shock protection.
Discover the MG Chemicals 8327GL5 Non-Silicone Liquid Thermal Gel, 5 W/(m·K) 180ml 294g Jar at Mektronics Australia – your trusted source for quality tools and equipment!
-
Thermal conductivity of 5.1 W/(m·K)
-
Flame retardant—meets UL94 V-0
-
High temperature stability
-
1-part, non-curable, dispensable gel
-
Zero pump out—no slump under low pressure
-
Silicone-free, will not contaminate surfaces
-
Low modulus, ideal for aggressive thermal cycling conditions
-
Part Number: 8327GL5-180ML
-
Net Weight: 294g
-
Packaging: Cartridge
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
