Image for Illustrative Purposes Only
JBC Logo

JBC Complete Rework Station 230V (Cartridges Not Included)

SKU: JBC-RMSE-2QF

RMSE-2QF

$9,235.37

EX. GST
$10,158.91
INC GST
In Stock

Order before 2pm today for same day dispatch of up to units from our Sydney warehouse.

own it from $10 a week with Group 2 Copy Created with Sketch.

DESCRIPTION
Features
Contents
Specifications
Shipping & Delivery

JBC Complete Rework Station 230V (Cartridges Not Included)

The RMSE / RMVE is the quickest and safest solution to solder and rework all kind of SMDs. It consists of stackable modules and all the necessary tools and accessories to make your job easier including, the DR560 Desoldering Iron, the T245 General Purpose Handle and the JT-TA Hot Air Heater.

The DDE manages up to 2 tools simultaneously and is fully compatible with 10 different JBC tools. The JTSE Hot Air Station controls the rework task using temperature and air flow profiles.

The Desoldering Module generates the vacuum needed to remove the molten solder from plated through hole and surface mount pads with the DR560. There are two station models, the RMSE which works with an electric pump and the RMVE which works with compressed air supply.

It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modes help to extend life of tips.

It features all the Excellence range benefits such as station customization, full control of soldering processes and remote work management.

NOTE: CARTRIDGES NOT INCLUDED

Discover the JBC Complete Rework Station 230V (Cartridges Not Included) at Mektronics Australia – your trusted source for quality tools and equipment!

  • Sleep and Hibernation mode(DDE): These modes lower soldering tip temperature when the tool rests in the stand in order to avoid oxidation and extending tip life.

  • Max. and min. temperature:: Limit the temperature range in which the operator is allowed to work.

  • Temperature levels (DDE): Instant selection of up to 3 editable temperature settings for solder joints with different heat requirement.

  • Soldering graphics: Real time visualization of tip temperature and power delivered to the solder joint during soldering process.

  • PIN protection: Keep station parameters protected against unauthorized access.

  • 10 user interface languages: English, German, Spanish, French, Italian, Portuguese, Russian, Japanese, Korean, Chinese.

 

  • Hot Air Control Unit

  • DDU 2-Tool Control Unit

  • MSE Electric Desoldering Module for DDU & DMU

  • T245 General Purpose Handle (cartridge not included)

  • DR560 Desoldering Iron (C560003 already inserted)

  • JTT Heater Hose Set

  • ADS Stand for T210 & T245 Handles

  • DRS Stand for DR560 Desoldering Iron

  • JTS Stand for JTT Heater Hose Set

  • ESHT Extractor Stand for Hot Air

  • T260 Pick & Place Handle

  • SCH Cartridge Holder

  • Temperature (DDU): 90 to 450 ºC / 190 to 840 ºF

  • Temperature (JT): 150 to 450 ºC / 300-840 ºF

  • Air Flow (JT): 5 to 50 SLPM

  • Operation Modes (JT): Heating / Profiles / Cooling

  • Vacuum (MSE): 75% / 570 mmHg / 22.4 inHg

  • Temperature (DDU): 30% / 228mmHg / 9 inHg

Connectivity

  • USB-B (rear): Software PC / Traceability

  • USB-A (front): Firmware update. Soldering Graphics / Profiles management.

  • Robot: RS-232 remote control or Smart Fume Extractor connection

  • TC Type K (JT): Can be used both for Control and Protection purposes.

  • Pedal: Optional tool control

  • Equipotential bonding: Optional connection to EPA

ESD / EOS

  • ESD Safe

  • Tip to ground resistance <2 ohms

  • Tip to ground voltage <2 mV RMS

Power Supply

  • Peak Power (DDU): 150 W per tool - 23.5 V

  • Peak Power (JT): 700W

  • Operating Temp Range: 10 to 50 ºC / 50 to 120 ºF

SHIPPING

A delivery and handling charge applies to all orders with the exception of back-ordered items.

Unless otherwise required by Buyer, Seller will make transport arrangements as follows:

For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods

For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.

Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.

Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.

DELIVERY TIME

All quoted delivery or consignment dates are estimates only, given without engagement.

Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.

Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer

a) in the event of a delay in consignment or delivery of goods: or

b) in the event of non delivery.

Goods offered ex-stock by Seller are subject to prior sale.

In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.