Image for Illustrative Purposes Only
JBC 2 Tools DDU Desoldering Station with Electric Pump 230V (Cartridges Not Included)
SKU: JBC-DDSE-2QD
DDSE-2QD
DESCRIPTION
Includes
Cartridge Range
Specifications
Shipping & Delivery
JBC 2 Tools DDU Desoldering Station with Electric Pump 230V (Cartridges Not Included)
The complete solution to rework circuits with medium power requirement.
Equipped with T245 General Purpose Handle and DR560 Desoldering Iron.
Its DDE 2-Tool Control Unit is capable of manage up to 2 tools simultaneously and fully compatible with 10 different JBC tools.
It provides the best rework quality thanks to JBC Most Efficient Soldering System and, additionally, the intelligent Sleep & Hibernation Modes help to extend life of tips.
NOTE: CARTRIDGES NOT INCLUDED
Discover the JBC 2 Tools DDU Desoldering Station with Electric Pump 230V (Cartridges Not Included) at Mektronics Australia – your trusted source for quality tools and equipment!
-
1 x Instruction Manual
-
1 x DDE 2-Tool Control Unit
-
1 x MSE Electric Desoldering Module for DDE & DME
-
1 x T245 General Purpose Handle - (cartridge not included)
-
1 x DR560 Desoldering Iron - (C560003 already inserted)
-
1 x ADS Stand for T210 & T245
-
1 x DRS Stand for DR560
-
1 x SCH for Cartridge & Tips Holder
-
Selectable Temperature: 90 to 450ºC / 190 to 840 ºF
-
Idle temp. stability (still air): ±1.5ºC (±3ºF), Meets and exceed IPC J-STD-001F
-
Temp Accuracy: ±3% ( using reference cartridge)
-
Temp Adjustment: ±50ºC (±90ºF) Through station menu setting
-
Vacuum: 75% / 570 mmHg / 22.4 inHg
-
Flow Rate: 9 SLPM
-
Connectivity: USB-B (Rear) - Software PC / Traceability, USB-A (Front) Firmware update Soldering Graphics management, RJ12 Connector
-
ESD/EOS: Tip to ground vol./resist. Meets & exceed, ANSI/ESD S20.20-2014 IPC J-STD-001F
-
Peak Power: 150W per tool - 23.5V
-
Operating Temp Rate: 10 to 50 ºC / 50 to 122 ºF
-
Dimensions: 232 x 148 x 120mm
-
Weight: 9.25kg
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
