







Work independently
High efficiency thanks to brushless motor
Basic unit cordless impact wrench (without rechargeable battery, charger, case)
18 V, 5 Ah
There are three power stages to choose from for torque acceleration:
Stage 1 80 Nm at 0 – 600 rpm (0 – 1200 impacts/min)
Stage 2 300 Nm at 0 – 1400 rpm (0 – 2500 impacts/min)
Stage 3 500 Nm at 0 – 2000 rpm (0 – 3400 impacts/min)
Illumination of the work area before the output begins to move
Amperage without load: 5.5 A
Net weight: 1.86 kg (without rechargeable battery)
Dimensions including rechargeable battery: 204 x 64 x 259 mm
Including belt clip, attachable on both sides
Brushless DC motor (BLDC)
Longer service life, less wear, no need to change the carbon brushes
High efficiency and hence less battery consumption
More compact motor enables smaller dimensions
Recommended torque: 500 Nm
Sound power level: 110.4 db(A) Lp W
Vibration acceleration: 20.30 m/s2
Loosening torque (max) determined with screw size M: 16
Forward and reverse: multi-stage (right/left)
Output: Square, solid 12.5 mm (1/2 inch)
Dimensions / length: 204 mm
Tightening torque max.: 500 Nm
Maximum loosening torque: 700 Nm
Sound pressure level: 99.4 dB(A) Lp A
Revolutions per minute: 0 – 2000
Do you know – Li-Ion batteries:
Do not have any memory effect
Consist of cells with 3.6 V each
After full charge they have a higher voltage than 3.6 V i.e. 5 cells each 3.6 V = 18 V – but after full charge a peak voltage of up to 20 V is possible
Attention: For a longer lifetime of the battery please store it charged up to 50 to 80 % only
Have an energy density which is twice as high as nickel cadmium batteries, for example
Have a nominal voltage three times higher than a nickel metal hydride battery
Require multiple complete charging cycles to reach full capacity
Discover the Hazet 1/2" (12.5mm) Square Solid Cordless Impact Wrench 700Nm 9212-010 at Mektronics Australia – your trusted source for quality tools and equipment!
Loosening torque maximum |
700 Nm |
Manual/impact operation |
For impact operation |
Forward and reverse |
multi-stage (right/left) |
Output |
1/2 inch (12.5 mm) square, solid |
Revolutions per minute |
0 – 2000 |
Recommended torque |
500 Nm |
Dimensions |
204 mm |
Battery capacity [Ah] |
5 Ah |
Battery voltage [V] |
18 V |
Rechargeable battery / battery replaceable |
No |
Tightening torque maximum |
500 Nm |
Length |
204 mm |
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.