Image for Illustrative Purposes Only
Hakko FG-101B Soldering Iron Tester
SKU: HFG101B-42
FG-101B-42
Features
Specifications
Shipping & Delivery
-
Soldering iron tester for measurement of tip temperature, leak voltage, and tip to ground resistance
-
Human error-free operation
-
Long life sensor AS5000 (with certificate of conformance) is equipped as standard.
-
Lead free
-
Max Hold Function (Temperature Measurement)
-
Temperature Measurement Count Function
-
Auto Zero Function
Discover the Hakko FG-101B Soldering Iron Tester at Mektronics Australia – your trusted source for quality tools and equipment!
|
Power consumption |
3.2W (100V), 3.6W (100-110V), 3.2W (120V), 3.6W (220-240V) |
|---|---|
|
Temperature resolution |
1 ºC |
|
Temperature measurement range |
0 to 700 ºC |
|
Temperature precision |
±3 ºC (300 to 600 ºC) ±5 ºC (other than above) |
|
Temperature sensor |
K (CA)type thermocouple |
|
Voltage resolution |
0.1mV |
|
Voltage measurement range |
0 to 40mV |
|
Voltage precision |
± (5% of reading + 1 digit) |
|
Resistance resolution |
0.1Ω |
|
Resistance measurement range |
0 to 40Ω |
|
Resistance precision |
± (5% of reading + 1 digit) |
|
Display |
LCD : 3 1/2digits |
|
Operating environment |
Ambient temperature/Humidity range : 0 to 40 ºC, max.80% RH (without condensation) |
|
Environmental conditions |
Applicable rated pollution degree 2 (According to IEC/UL 61010-1) |
|
Dimensions |
211(W)×53(H)×126(D)mm |
|
Weight |
0.95kg |
* Temperature sensor can only be used to measure temperatures below 500 ºC. To measure higher temperatures, use an applicable temperature probe.
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
