Image for Illustrative Purposes Only
CAB Maestro 3E PCB Separator
SKU: CAB8933945
8933945
DESCRIPTION
Shipping & Delivery
CAB Maestro 3E PCB Separator
-
For small and large PCBs with pre-scored groove.
-
MAESTRO 3E separates both small and large pre-scored PCBs.
-
The table and the rest can be continuously adjusted to the most suitable working position.
-
The slit between the linear blade and the rest can be adjusted to ensure that the side strips fall through and are sorted out.
The PCB is placed with its pre-scored groove onto the linear blade and the circular blade is then drawn by hand across the PCB. The clearance between the upper guide and the linear blade ist adustable to ensure that the PCB is only separated in the pre-scored groove.
Technical Data|
Separation type |
Component side: circular blade Solder side: linear blade |
|
|
Operation |
by hand |
|
|
Separation length |
max. 450 mm |
|
|
Material |
FR4 |
|
|
Temperature / Humidity Operation Temperatur / Luftfeuchte Storage Temperatur / Luftfeuchte Transport |
+5 - 40 ° C / 10 - 85 % non-condensing +0 - 60 ° C / 20 - 80 % non-condensing -25 - 60 ° C / 20 - 80 % non-condensing |
|
|
Weight |
22 kg |
|
|
Dimensions H x W x D |
455 x 350 x 700 mm |
|
|
Approvals |
||
Discover the CAB Maestro 3E PCB Separator at Mektronics Australia – your trusted source for quality tools and equipment!
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
