Bostik 30803687 Seal N Flex FC Sealant White 600ml

• One component, no mixing required

• Fast tack free time and cure rate

• Internal and external bonding

• High bond strength

• Excellent adhesion to most materials

• Excellent acoustic properties

• Paintable* − ± 25% joint movement

• Non-slumping

• Resistant to fungal attack

• Water potable

• Excellent resistance against hydrolysis, aging and a wide range of chemicals

• Made in Australia

Bostik Seal ‘N’ Flex® FC is a high performance, fast cure one component polyurethane sealant. When cured, it will form a tough and flexible seal and bond capable of cyclic, expansion and compression movement. It is virtually unaffected by normal weathering conditions such as rain, sunlight, snow, sleet, ultra-violet radiation, Ozone, atmospheric contamination and pollution. Its excellent weather ability enables it to retain its original properties after years of exposure. Bostik Seal ‘N’ Flex FC can be used for:

• Sealing gaps and adhering most façade and cladding panels to various building materials

• Sealing construction and expansion joints

• Sealing floor and concrete joints

• Trafficable areas including plats, stairs, roads, runways, aprons and pavements

• Granite, sandstone and marble pointing

• GRC, fibreglass and most specialty panel systems

• Vertical-Precast, block work, plasterboard and most common building substrates

• Pick resistant areas including prisons, cells, schools and public amenities

• Chemical resistant areas including service stations, hangers, aprons and bunded areas

• Potable water tanks

• Perimeter sealing of door and window framing

• For new construction and remedial applications

• Adhesive for wide range of building and construction applications

• Tack free time: 45 minutes

• Cure rate: 3.0 mm/24 hours

• Temperature resistance: -40 to +70°C

• Full cure: 7 days

• Shore A hardness: 45

• Tensile strength: 2.5 to 3.0 N/mm²

• Elongation at break: > 450%

• Total joint movement: ± 25%

• Maximum joint width: Up to 50mm on horizontal substrates Up to 20mm on vertical substrates

SHIPPING

A delivery and handling charge applies to all orders with the exception of back-ordered items.

Unless otherwise required by Buyer, Seller will make transport arrangements as follows:

For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods

For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.

Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.

Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.

DELIVERY TIME

All quoted delivery or consignment dates are estimates only, given without engagement.

Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.

Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer

a) in the event of a delay in consignment or delivery of goods: or

b) in the event of non delivery.

Goods offered ex-stock by Seller are subject to prior sale.

In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.