Image for Illustrative Purposes Only
Bordo 125mm Turbo Fast Cut Diamond General Purpose Blade
SKU: BOR7472-125
7472-125
DESCRIPTION
Specifications
Shipping & Delivery
Bordo 125mm Turbo Fast Cut Diamond General Purpose Blade
-
125mm Turbo Fast Cut Blade
-
Tradecut Diamond Saw Turbo Rim
-
Turbo blades typically have soft to medium bonds for a variety of general purpose to specific cutting applications.
-
Turbo blades feature a continuous rim with an edge that is serrated.
-
This serrated edge is designed to give the blade faster cutting speeds while maintaining a smooth cut, combining the best qualities from both segmented and continuous rim blades.
-
Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
-
The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
-
Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
-
If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
-
If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a 'glazed blade'. Without exposed diamond the blade will not cut.
-
Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
-
The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
-
The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
Discover the Bordo 125mm Turbo Fast Cut Diamond General Purpose Blade at Mektronics Australia – your trusted source for quality tools and equipment!
| Part Number: | 7472-125 |
| Brand: | Bordo |
| Sub Brand: | Enduro Diamond |
| Barcode: | 9326518171607 |
| Pack Qty: | 1 |
| Pack Type: | Single |
| Packaging: | Clam Shell |
| Maximum RPM: | 12000 |
| Bore (mm/inch): | 22.2 |
| Bushes (mm / inch): | 20, 16 |
| Diameter (inch): | 5 |
| Diameter (mm): | 125 |
| Segment Height (mm): | 7 |
| Rim Type: | Turbo |
| Ideal For: | Fast Cut General Purpose |
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
