Image for Illustrative Purposes Only
BOFA T30A High Vacuum Fume Extraction System Powder Coated
SKU: BOFE2142A
E2142AT30A
DESCRIPTION
Features
Specifications
Shipping & Delivery
BOFA T30A High Vacuum Fume Extraction System Powder Coated
Centralised tip extraction for lead and lead free solder applications.
The T 30A high vacuum unit has been designed to extract and filter fumes and debris through small bore hoses. Ideally suited to hand soldering iron tip extraction, the unit will protect up to 30 operators. The unit can also be used for Vac pens and any application requiring close proximity, micro extraction.
Automatic flow control comes as standard. This allows the unit to be set to the optimum flow rate to suit the number of operators connected to the system. The unit will then maintain the set airflow over the life of the filters ensuring maximum protection to the operators.
NOTE: IMAGE IS STAINLESS STEEL MODEL - THIS PRODUCT IS POWDER COATED
-
Bofa uses mini pleat design HEPA (high efficiency particulate air) filters which are tested and certified to a minimum efficiency of 99.997% down to 0.3 microns and 95% as small as 0.1 micron. They incorporate a series of webbing between the pleated media. This feature not only guarantees even spacing for full filter coverage between each pleat, but also alleviates the possibility of airflow vibration or collapse.
-
Automatic flow control (AFC): Automatic flow control (AFC) allows the operator to preset the correct airflow rates for the specific application, subsequently maintaining the airflow. This generates lower noise levels and ensures further protection of the more expensive HEPA filters.
-
Advanced carbon filter technology: ACR assures safe capture and removal of hazardous fumes. Contaminated air must remain in contact with the carbon bed for a period of time sufficient to ensure that no contaminants or odours are emitted ('dwell time'). Our filters have been developed to capture all contaminants and odours, eliminating the risk of bypass and/or tunnelling.
Discover the BOFA T30A High Vacuum Fume Extraction System Powder Coated at Mektronics Australia – your trusted source for quality tools and equipment!
-
Automatic flow control
-
Reverse flow
-
'Easi-Seal' filter location
-
Small footprint
-
Low noise levels
-
Brushless motor
-
Dimensions (HxWxD): 725x450x480mm
-
Cabinet Construction: Powder coated mild steel
-
Recommended flow rate with filters fitted (per tip): 22 L/M
-
Electrical Data: 230v 1ph 50/60Hz Full load current: 7.3amps / 1.1kw
-
Noise level: <68dBa (at typical operating speed)
-
Weight: 56kg
-
Pre filter efficiency: 85% @ 0.8 microns
-
HEPA filter efficiency: 9.997% @ 0.3 microns
-
Gas Filter: Treated activated carbon
Replacement Filter Parts
- Pre filter: A1030093
-
Combined filter: A1030399
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
