Image for Illustrative Purposes Only
CAB Hektor 2 PCB Separator
SKU: CAB8932145
8932145
DESCRIPTION
Shipping & Delivery
CAB Hektor 2 PCB Separator
The Cab Hektor 2 PCB Seperator separates milled PCBs carefully and fast. The offcut material is removed smoothly and precisely. The matrix consists of two parts. This ensures easy and cost-saving change of the blades. Compressed air is used for the separation process.
The operating pressure can be set on the machine. When the foot switch is pressed, the off-cut is punched out. The off-cuts are collected in the collecting box. When the gate is opened the waste material can be extracted.
Safe operationThe PCB is slipped with its milled groove over the blade and is placed onto the matrix. The off-cut is pulled under the blade. When the foot switch is pressed, the off-cut is punched out and the waste material is collected inside the machine.
T-Blade: With the T-blade off-cuts can be punched out right and left of the blade without turning the PCB.
L-Blade: The L-blade will be used if there are small distances between the off-cuts
Matrix: Included in delivery
Technical Data|
Separation type |
Punch blade |
|
Operation |
By hand |
|
PCB thickness |
Max. 2.5 mm |
|
Air connection |
1/4"-plug-in coupler |
|
Operating pressure |
Typical 4 bar |
|
Temperature / Humidity Operation |
+5 - 40 ° C / 10 - 85 % not condensing +0 - 60 ° C / 20 - 80 % not condensing -25 - 60 ° C / 20 - 80 % not condensing |
|
Weight |
2.7 kg |
|
Dimensions H x W x D |
170 x 220 x 255 mm |
|
Approvals |
CE, FCC class A |
Discover the CAB Hektor 2 PCB Separator at Mektronics Australia – your trusted source for quality tools and equipment!
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
