Amprobe AT-8020 Advanced Wire Tracer Kit
Amprobe AT-8020 Advanced Wire Tracer Kit
Amprobe AT-8020 Advanced Wire Tracer Kit
Amprobe AT-8020 Advanced Wire Tracer Kit
Amprobe AT-8020 Advanced Wire Tracer Kit
Image for Illustrative Purposes Only
Fluke Logo

Amprobe AT-8020 Advanced Wire Tracer Kit




$2,741.23 including GST
Please contact us for lead time

own it from $10 a week with Group 2 Copy Created with Sketch.

Shipping & Delivery

Designed to keep electricians safe - CAT IV 600 V rated for the highest protection available on any wire tracer. Electricians are protected from the most dangerous level of transient overvoltage spikes up to 8,000 V that are known to occur in industrial environments.

Save time, no blind searching - See hidden wires like never before with the AT-8000-R Receiver's patented Smart Sensor™, which finds and displays the location and orientation of energized wires in walls, floors and ceilings on the large color TFT LCD screen. The Scan and Locate feature clearly identifies the single correct breaker or fuse, eliminating the confusion from multiple false positive readings common in older technology tracing tools. Embedded help screens make set-up easy and error free for novice users and experts alike.

  • Work directly on an energized circuit without the need to take equipment offline, CAT IV 600 V rated

  • Save time searching for wires hidden behind walls, ceilings and floors with the Smart Sensor™, which displays the location and orientation of energized wires

  • Pinpoint wire location with the large color LCD Receiver screen

  • Identify breakers and fuses, as well as the location of a break, open or short

  • Non-Contact Voltage Detection utilizes passive tracing without the Transmitter to verify if a wire is energized

Product Highlights
  • Trace Energized and De-energized wires in walls, ceilings, floors and tight spaces

  • Identify breakers and fuses

  • Pinpoint shorts and opens

  • Non-contact voltage mode and passive tracing

  • High resolution 3.5"³ TFT LCD color display

  • Three Transmitter power modes: "High Signal" mode for normal circuits, "Low Signal" mode for precision tracing in difficult areas and "Loop" mode for closed loop de-energized circuits

  • Two automatically selected frequency modes for optimal tracing on energized and de-energized circuits

  • Embedded help screens for easy, error free set-up

  • Comes with custom Amprobe hard carrying case, test leads and accessories and batteries

  • AT-8000-R Receiver

  • AT-8000-T Transmitter

  • TL-8000 Test lead and accessory kit*

  • CC-8000 Hard carrying case

  • 12 x 1.5 V AA batteries

  • User Manual and Quick Reference Guide

* TL-8000 test lead and accessory kit includes:

  • 2 x 1 m test leads (red, black)

  • 1 x 7 m test lead (green)

  • 2 x alligator clips (red, black)

  • 2 x outlet blade adapters (red, black)

  • 2 x outlet round adapters (red, black)

AT-8000-R Receiver AT-8000-T Transmitter CT-400 Signal Clamp
Display size LCD 3.5 in (89 mm) LEDs N/A
Display dimensions (W x H) 2.76 x 2.07 in (70 x 52 mm) N/A N/A
Display Resolution 320 x 240 N/A N/A
Display type Color TFT LCD LEDs N/A
Display color Yes Operating mode LEDs: red
Battery status LEDs: green, yellow, red
Booting time 30 sec < 2 sec N/A
Operating temperature -4 °F to 122 °F (-17.77 °C to 49 °C) -4 °F to 122 °F (-20 °C to 50 °C) 32 °F to 122 °F (0 °C to 50 °C)
Operating humidity 45%: -4 °F to <50 °F (-20 °C to <10 °C)
95%: 50 °F to <86 °F (10 °C to <30 °C)
75%: 86 °F to <104 °F (30 °C to <40 °C)
45%: 104 °F to 122 °F (40 °C to 50 °C)
45%: -4 °F to <50 °F (-20 °C to <10 °C)
95%: 50 °F to <86 °F (10 °C to <30 °C)
75%: 86 °F to <104 °F (30 °C to <40 °C)
45%: 104 °F to 122 °F (40 °C to 50 °C)

95%: 50 °F to <86 °F (10 °C to <30 °C)

75%: 86 °F to <104 °F (30 °C to <40 °C)

45%: 104 °F to <122 °F (40 °C to <50 °C)

Operating altitude

0 to 6561 ft (2000 m)

Transient protection


8.00 kV (1.2/50μS surge)


Pollution degree


IP rating

IP 52

IP 40

Drop test

3.28 ft (1 m)

Power supply

4 x AA (alkaline)

8 x AA (alkaline)


Power consumption (typical)

4xAA battery: 2W

Hi mode: 70 mA

Loop mode with Clamp: 90 mA

Consumption without signal transmission: 10 mA


Battery life

Approx. 9 h

Hi mode: approx. 25 h

Loop mode: approx. 18 h


Low battery indication





1.6 A, 700 V, fast-acting,

Ø 6x32mm


Maximum conductor size



1.26 in (32 mm)

Dimensions (L x W x H)

Approx. 10.92 x 4.43 x 2.55 in

(27.75 x 11.25 x 6.5 cm)

Approx. 7.2 x 3.66 x 1.97 in

(18.3 x 9.3 x 5 cm)

Approx. 5.9 x 2.75 x 1.18 in

(15 x 7 x 3 cm)


Approx. 1.20 lb (0.544 kg)

Approx. 1.25 lb (0.57 kg)

Approx. 0.25 lb (0.114 kg)



Measurement category

CAT IV 600 V (test leads)

CAT IV 600 V (alligator clips)

CAT II 300 V (outlet adapters)

Operating voltage and current

600 V, 10 A max. (red/black leads)

600 V, 6 A max. (green lead)

600 V, 10 A max. (alligator clips)

300 V, 10 A max. (outlet adapters)

Operating temperature

32 °F to 122 °F (0 °C to 50 °C)

Operating Humidity

95%: 50 °F to <86 °F (10 °C to <30 °C)

75%: 86 °F to <104 °F (30 °C to <40 °C)

45%: 104 °F to <122 °F (40 °C to <50 °C)

Storage temperature and humidity

-4 °F to 140 °F (-20 °C to 60 °C), <95% RH

Operating altitude

0 to 6561 ft (2000 m)

Pollution degree


Water and dust resistance

IP 20

Drop proof

3.28 ft (1 m)


Red/black leads: 3.28 ft (1 m)

Green lead: 22.97 ft (7 m)

Alligator clips: approx. 3.74 x 1.77 x 0.94

in (95 x 45 x 24 mm)

Outlet adapters: 2.83 x 0.71 x 0.71 in

(72 x 18 x 18 mm)


Approx. 0.88 lb (0.4 kg)


A delivery and handling charge applies to all orders with the exception of back-ordered items.

Unless otherwise required by Buyer, Seller will make transport arrangements as follows:

For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods

For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.

Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.

Free shipping on orders over $175 excluding GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.


All quoted delivery or consignment dates are estimates only, given without engagement.

Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.

Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer

a) in the event of a delay in consignment or delivery of goods: or

b) in the event of non delivery.

Goods offered ex-stock by Seller are subject to prior sale.

In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.